Is a print
head error message is constantly flashing on your printer’s control panel? Do
you want to restore HP print head error code at the earliest? Hardware issues
aren’t easy to tackle and need a professional approach to get resolved. With
the help of the following methods, you could restore printer head error in a
prompt manner. We strongly suggest you avoid improvising the solutions for the
sake of a prompt result, as it could damage the printer quite badly.
Reset the HP Printer
●
Turn your
printer on and then detach all the cable including the USB from its port.
●
Now leave
your printer in this state for a couple of minutes.
●
Connect the
power cable to your printer and let it boot.
●
Go to the
printer’s control panel and sees if the error still exists.
●
If the error
reappears again, try the next method
Reseat the print head couple of times
● Detach the
power supply cable from the back to turn off your printer (Note: avoid using the conventional way to complete such a task).
●
Now you need
to pull up the carriage latch.
●
Next, lift
the print head slightly and then set it to its original position again.
●
Now, hold
the print head again and move it on either side across the horizontal axis.
●
Use the
carriage latch to set the print head to its default location and close the
access door of the cartridges assembly.
●
In this
step, you need to turn on the printer by plugging the power cable back to the
machine.
●
If the error
persists, retry this approach at least two times.
In case of any mishap, call HP live chat for
help
These are
the best possible ways to restore the print head error. If you face this error
again then try installing the latest version of the printer firmware. If none
of these techniques works then somewhere down the line you need expert
intervention. For that, you need to call HP customer service where you can share your queries with the best-skilled
technicians.
No comments:
Post a Comment